Von Neumann architecture, CPU components, registers and the fetch-decode-execute cycle. Sourced directly from Seaford's Craig 'n' Dave slides.
—
Best score
—
Last attempt
Best attempt progress
0
XP earned
Watch first — Craig 'n' Dave
Craig 'n' Dave · Edexcel 1CP2Common CPU components and their function (6:08)
Craig 'n' Dave · Edexcel 1CP2Von Neumann architecture (13:54)
Craig 'n' Dave · Edexcel 1CP2The fetch-execute cycle (3:51)
Key facts
Von Neumann architecture — fill in the table
Based on the stored program concept — both instructions and data are held in the same main memory (RAM). CPU components: Control Unit (CU), Arithmetic Logic Unit (ALU), registers.
Component
Role
CU
ALU
Clock
Registers — the four usually taught (the spec just says "registers") — fill in the table
Register
Role
Program Counter (PC)
Memory Address Register (MAR)
Memory Data Register (MDR)
Accumulator (ACC)
Fetch-Decode-Execute cycle — step by step
FETCH: PC is checked → address copied to MAR → instruction fetched from RAM into MDR → PC incremented to next address
DECODE: CU decodes the instruction in the MDR to determine what needs to be done
EXECUTE: Instruction is carried out — e.g. data fetched from RAM, arithmetic performed in ALU, result stored in Accumulator
This cycle happens billions of times per second on a modern CPU
Buses and main memory (spec 3.1.1) — fill in the table
Part
Role
Address bus
Data bus
Control bus
Bus width
Stored program concept
Role of RAM
How the buses are used in a fetch
The PC address is copied to the MAR.
The address goes out on the address bus to main memory.
The control bus carries a read signal from the control unit.
The instruction travels back along the data bus into the MDR.
Exam questions — 8 questions · 16 marks
⚡ This module includes extended questions (4–6 marks). Read the hint. Write in full linked sentences. The AI will tell you exactly which mark scheme points you missed.
1 markCPU componentsEdexcel 1CP2 style
What is the role of the Control Unit (CU) in the CPU?
A Performs arithmetic and logical calculations
B Holds the address of the next instruction to be executed
C Sends signals to control how data moves around the CPU and decodes instructions
D Temporarily stores the result of arithmetic operations
1 markRegistersEdexcel 1CP2 style
After an instruction is fetched from memory, what is incremented?
A The Memory Address Register
B The Program Counter
C The Accumulator
D The Memory Data Register
4 marksFetch-Execute cycleEdexcel 1CP2 style
Describe the three stages of the fetch-decode-execute cycle. For each stage, state what happens. (4 marks)
Hint: Cover all three stages in order. For fetch, mention PC, MAR and MDR. For decode, mention the CU. For execute, give an example.
+40 XP
1 markClock speedEdexcel 1CP2 style
A CPU has a clock speed of 2GHz. How many fetch-execute cycles does it complete per second?
A 2,000
B 2,000,000
C 2,000,000,000
D 20,000,000
4 marksCompare CPU performance factorsBeyond spec (extra): cache memory is not named in the Edexcel spec
Explain how clock speed and cache memory affect the performance of a CPU. (4 marks)
Hint: Cover clock speed (what it is + how it affects performance) then cache (what it is + why it speeds things up). Two marks available for each.
+40 XP
1 markAddress busEdexcel 1CP2 style
Which bus carries the address of the memory location the CPU wants to read?
A The data bus
B The address bus
C The control bus
D The clock
3 marksBusesEdexcel 1CP2 style
Describe the role of each of the address bus, the data bus and the control bus. (3 marks)
Hint: One mark for each bus. Say what travels along it.
+30 XP
1 markStored program conceptEdexcel 1CP2 style
In the Von Neumann architecture, where are instructions held while a program runs?