LAN vs WAN, network topologies, hardware components, wired vs wireless. Typically 6–10 marks on Component 1. Sourced from Craig 'n' Dave slides.
—
Best score
—
Last attempt
Best attempt progress
0
XP earned
Watch first — Craig 'n' Dave
Craig 'n' Dave · Edexcel 1CP2Types of networks (3:05)
Craig 'n' Dave · Edexcel 1CP2Wired and wireless networks and performance (15:26)
Craig 'n' Dave · Edexcel 1CP2Network speeds (5:17)
Craig 'n' Dave · Edexcel 1CP2Network topologies (5:13)
Craig 'n' Dave · Edexcel 1CP2How the internet is structured (6:01)
Key facts
LAN vs WAN — fill in the table
Term
Description
LAN (Local Area Network)
WAN (Wide Area Network)
The internet
Home routers
Network hardware — fill in the table
Hardware
Description
Router
Switch (extra: not in the Edexcel spec)
Wireless Access Point (WAP) (extra: not in the Edexcel spec)
NIC (Network Interface Card) (extra: not in the Edexcel spec)
Transmission media
Star topology
All devices connect to a central switch
Most popular wired network type
Advantage: if one cable fails, only that device is affected
Advantage: switch ensures data only goes where intended (secure)
Disadvantage: if the switch fails, the whole network fails
Disadvantage: more cabling required than bus
Other topologies — fill in the table
Topology
Description
Bus topology (historical)
Full mesh
Partial mesh
Why use a network? (spec 4.1.1) — fill in the table
Reason
Detail
Share resources
Share files
Communicate
Central management
Wired and wireless (spec 4.1.4) — fill in the table
Factor
Comparison
Speed
Range
Latency
Bandwidth
Other
Network speeds (spec 4.1.5) — fill in the table
Point
Detail
Unit
Bandwidth
Time to send a file
File sizes are in bytes
Rate from time
Edexcel convention (sample paper Q2(e)): file sizes use 1024 (1 MiB = 1024 × 1024 bytes) but network speeds use 1,000,000 bits per second for 1 Mbps. Example: 20 MiB at 2 Mbps takes (20 × 1024 × 1024 × 8) ÷ (2 × 1,000,000) seconds.
Worked example
A file of 3,000,000 bytes is sent at 2,000,000 bits per second.
Size in bits = 3,000,000 × 8 = 24,000,000 bits.
Time = 24,000,000 ÷ 2,000,000 = 12 seconds.
Exam questions — 10 questions · 26 marks
⚡ This module includes extended questions (4–6 marks). Read the hint. Write in full linked sentences. The AI will tell you exactly which mark scheme points you missed.
1 markLAN definitionEdexcel 1CP2 style
Which statement correctly describes a Local Area Network (LAN)?
A A network covering a large geographical area using leased infrastructure
B A network covering a small geographical area on a single site, with hardware owned by the organisation
C A network that always uses wireless connections only
D A network that connects to the internet via satellite
1 markStar topologyEdexcel 1CP2 style
In a star topology, what happens if a single cable between a device and the switch breaks?
A The entire network fails
B All other devices on the network are affected
C Only the device connected to that cable loses network access
D The switch automatically reroutes the connection
3 marksNetwork hardwareEdexcel 1CP2 style
Describe the role of a router in a network. How does it differ from a switch? (3 marks)
Hint: Router = connects different networks (LAN to internet). Switch = connects devices within the same LAN. Give the function of each and the key difference.
+30 XP
4 marksCompare wired and wirelessEdexcel 1CP2 style
Compare wired (ethernet/fibre) and wireless (Wi-Fi) connections for a school network. Give two advantages of wired and two advantages of wireless. (4 marks)
Hint: Two advantages each side. Think about: speed, reliability, security, flexibility, cost of installation.
+40 XP
1 markWAP functionBeyond spec (extra): wireless access points are not named in 4.1.4
What is the purpose of a Wireless Access Point (WAP)?
A To connect two separate networks together
B To allow wireless devices to connect to a wired network
C To store and manage IP addresses on a network
D To control which devices are allowed on a network
4 marksExplain star topology advantagesEdexcel 1CP2 style
A school is installing a new network. Explain why a star topology is recommended over a bus topology. (4 marks)
Hint: Give at least 2 advantages of star over bus. For each, explain WHY it is better — not just that it is different.
A file of 6,000,000 bytes is sent over a connection with a transmission rate of 12,000,000 bits per second. Calculate how long the transfer takes. Show your working. (3 marks)
Hint: Convert bytes to bits first, then divide by the rate.
+30 XP
1 markWired vs wirelessEdexcel 1CP2 style
Compared with a wireless connection, a wired connection usually has…
A higher latency
B lower latency and a more consistent speed
C easier movement of devices around a building
D bandwidth shared with every nearby device
2 marksWhy use a networkEdexcel 1CP2 style
Give two reasons why a company connects its computers in a network. (2 marks)
Hint: Think about what can be shared or controlled.
+20 XP
6 marksDesign a school network1CP2 style — 6-mark levelled
A school is installing a new network for 500 students and staff. Discuss the choices the school should make about topology, wired or wireless connections, and network speed. (6 marks)
Hint: Levelled question: give a reasoned recommendation for each choice and link it to the school. Consider speed, range, latency, bandwidth, cost and reliability.