The standard forms and sizes materials are sold in, and how to work out quantities, areas, volumes and waste.
—
Best score
—
Last attempt
Best attempt progress
0
XP earned
Watch first
MR Ridley Design & TechnologyStock forms of materials
Visual Gibberish RevisionStock forms, types and sizes
Key facts
Stock forms by material — fill in the table
Material
Forms, how sold, standard components
Papers and boards
Timber
Metals
Polymers
Textiles
Electronic components
Material management
Marking out from datums and using templates and patterns
A cutting list gives every part with its size and quantity
Nesting and pattern spacing place parts close together to reduce waste
Percentage waste = (area of material used − area of parts) ÷ area of material used × 100
Worked examples
Volume of an acrylic sheet 300 mm × 200 mm × 3 mm = 180 000 mm³ = 180 cm³
A 1200 mm × 600 mm sheet and rectangular parts 250 mm × 180 mm: 4 fit along 1200 mm and 3 along 600 mm, so 12 parts; parts area 12 × 45 000 = 540 000 mm² of 720 000 mm², waste = 25%
Exam questions — 4 questions · 9 marks
⚡ DT exam tip. Name the material or component, give a property or reason, and link it to the product or user. For "discuss" and "evaluate" questions give advantages AND disadvantages and a conclusion. The AI marks against the mark points.
1 markMetal stock formsAQA 8552 style
Which are standard stock forms of metal?
A Sheet, rod, bar and tube
B Yarn and fabric
C Powder and granules only
D Planks and mouldings
1 markTextiles sold byAQA 8552 style
How are fabrics typically sold?
A By roll size, width, weight and ply
B By voltage and current rating
C By length and diameter of bar
D By E12 values
3 marksNumber of partsAQA 8552 style
A sheet of MDF measures 1200 mm × 600 mm. How many rectangular parts of 250 mm × 180 mm can be cut from it, and what percentage of the sheet is wasted? (3 marks)
Hint: Work out how many fit along each side, then areas.
+30 XP
4 marksReducing wasteAQA 8552 style
Explain four ways a manufacturer can reduce material waste. (4 marks)
Hint: Think about layout, planning and standard sizes.