Measuring the frequency, wavelength and speed of waves in a ripple tank and in a solid, and judging how suitable the apparatus is.
—
Best score
—
Last attempt
Best attempt progress
0
XP earned
Watch first
FreeScienceLessons · AQA PhysicsRequired Practical 8: Ripple tank
FreeScienceLessons · AQA PhysicsRequired Practical 8: Waves in a solid
Method & key facts
Ripple tank method
1. Fill the ripple tank with water. Switch on the lamp above it so the waves cast shadows on a white screen below
2. Switch on the motor driving the dipper. Adjust it to produce a steady series of waves
3. Use a strobe light, or a camera/slow-motion video, to make the waves appear to stand still
4. Measure the distance across several wavelengths (for example 5) with a ruler, then divide to find one wavelength
5. Find the frequency from the motor setting (or count waves passing a point in a set time). Calculate speed: v = f × λ
Key ideas — fill in the table
Question
Answer
Wave speed equation
Why measure across several waves
Why use a strobe or video
Frequency of a wave
Wavelength
Waves in a solid (string or spring)
Attach a vibration generator to one end of a stretched string, fixed at the other end
Adjust the frequency of the signal generator until a clear standing wave forms
Measure the length of the string and count the half-wavelengths to find the wavelength
Take the frequency from the generator and calculate v = f λ
Suitability of apparatus
A ruler is fine for the ripple tank wavelength if measured across several waves
Counting waves by eye is unreliable at high frequency: use a strobe or video
Speed cannot be measured directly with a ruler and stopwatch for fast waves, so v = f λ is used
Exam questions — 4 questions · 9 marks
⚡ Required practical. Method, variables, results and evaluation questions like these appear in every paper. Write in full sentences. The AI marks against the mark points.
1 markWave speedAQA 8463 required practical style
A ripple tank wave has a frequency of 5.0 Hz and a wavelength of 0.020 m. What is its speed?
A 0.10 m/s
B 250 m/s
C 0.0040 m/s
D 5.02 m/s
1 markWhy measure across several wavesAQA 8463 required practical style
Why is the wavelength measured across several waves and then divided?
A To make the waves faster
B To reduce the percentage uncertainty in the measurement
In a ripple tank the distance across 5 wavelengths is 0.15 m and the frequency of the waves is 8.0 Hz. Calculate the wavelength and the wave speed. (3 marks)
Hint: Divide 0.15 m by 5 first.
+30 XP
4 marksMethodAQA 8463 required practical style
Describe how you would measure the speed of water waves in a ripple tank. (4 marks)
Hint: Describe how you make the waves visible, how you measure the wavelength and frequency, and the equation.